长寿命热障涂层的剥落机理及抗剥落结构设计

涂覆于高温合金热端部件表面的热障涂层,具有隔热防护作用,属新一代燃气轮机的关键核心技术。等离子喷涂制备的热障涂层隔热性能好,但长时间高温服役后存在开裂剥落问题,引发基体烧蚀、造成巨大经济损失。因此,发展长寿命热障涂层是该技术领域的重大难题。本文从等离子喷涂热障涂层的独特层状结构特征入手,阐述涂层在高温服役中结构和性能的演变规律,揭示涂层剥落失效机理,总结长寿命热障涂层设计方法。研究表明,等离子喷涂热障涂层呈现以连通2D孔隙为主的层状多孔结构,具有优异的隔热功能和协调应变能力。然而,涂层在高温服役中发生烧结,2D孔隙大量消失,涂层显著刚化,使热障涂层开裂驱动力急剧增加,引发微观裂纹扩展并贯通形成大尺度裂纹,导致涂层最终剥落失效。据此,分别从降低开裂驱动力和增加开裂阻力两方面着手,总结抗开裂新结构涂层设计方法,为研发长寿命热障涂层指明了发展方向。在未来研究中,如何保证涂层高隔热和长寿命并同时兼顾经济性,是发展新一代高性能热障涂层的重点方向。     

斜孔式等离子体合成射流激励器静特性的实验

设计了斜孔式等离子体合成射流激励器，采用电参数测量和高速纹影技术研究了其放电特性及瞬态流场特性。实验表明:相较直孔式等离子体合成射流激励器，斜孔式等离子体合成射流激励器的射流流动表现出明显的附壁效应和非对称性，这有利于提高射流对流动分离的控制能力。同时，实验中还观察到了浮力对等离子体高温射流流场演化的影响，特别是在射流演化的末期，其诱导的垂向速度分量显著地改变了射流的最终运动方向。      

临近空间地面模拟装置等离子体源仿真研究

为了指导临近空间地面模拟装置中等离子体源结构设计及等离子体环境参数优化，围绕相关指标体系要求，采用数值模拟方法，分析临近空间等离子体环境地面模拟装置中的射流等离子体与下游目标模拟体相互作用。通过研究射流入口处等离子体状态与下游等离子体对钝体包覆效果的依赖关系，明确了影响包覆特性的关键等离子体参数、重要外控参量，及其对下游目标模拟体包覆特性的影响规律。仿真结果表明：相对于其他因素，射流入口的半径、气体流速、速度偏角、气体温度、钝体直径、环境背压等工况对有效实验区长度及厚度参数的影响较大。相关结果对于临近空间等离子体环境地面模拟装置中等离子体源优化设计及等离子体环境参数定向调控具有指导和借鉴意义。     

Development and coupling test of active spacecraft potential control – Next generation (ASPOC-NG)

The active spacecraft potential control (ASPOC) system developed in the 1990s emits positive ions to neutralise the spacecraft potential, such as used in several missions like Geotail, Equator-S, Cluster, Doublestar and MMS. With the experience gained, the next generation of the active spacecraft potential control (ASPOC-NG) instrument has been developed over the last three years. Thereby, three emission technologies were tested including Liquid Metal Ion Source (LMIS), Liquid Metal Electron Source (LMES) and Solid Metal Electron Source (SMES). The development of the emitter module by FOTEC and the corresponding electronics control unit by IWF is presented. Optimisations were carried out with the focus on the reduction of mass and power consumption to comply with the requirements of future scientific missions. Coupling tests of the modules and the electronics control unit were performed including range, accuracy and lifetime tests. Both ASPOC-NG instruments for positive and negative charge compensation and their performance values show excellent results.     

高频热等离子体法合成纳米ZrC粉体及其表征

以炭黑和甲烷分别作为碳源,四氯化锆作为锆源,采用高频热等离子体法合成了超细ZrC粉体。分别采用XRD、高频红外燃烧、SEM、化学重量法对实验产物进行了表征,分析了超细ZrC粉体的物相、纯度、粒径与碳源及进气量之间的影响规律。研究表明:采用不同碳源所合成的ZrC粉体粒径均在100 nm以下,相比较炭黑为碳源,甲烷作为碳源合成的产品纯度高,氧含量低,产率大,因此,甲烷作为碳源更适于批量制备超细ZrC粉体。     

An atmosphere-breathing propulsion system using inductively coupled plasma source

CubeSats have attracted more research interest recently due to their lower cost and shorter production time. A promising technology for CubeSat application is atmosphere-breathing electric propulsion, which can capture the atmospheric particles as propulsion propellant to maintain long-term mission at very low Earth orbit. This paper designs an atmosphere-breathing electric propulsion system for a 3 U CubeSat, which consists of an intake device and an electric thruster based on the inductively coupled plasma. The capture performance of intake device is optimized considering both particles capture efficiency and compression ratio. The plasma source is also analyzed by experiment and simulation. Then, the thrust performance is also estimated when taking into account the intake performance. The results show that it is feasible to use atmosphere-breathing electric propulsion technology for CubeSats to compensate for aerodynamic drag at lower Earth orbit.     

Shocks and instabilities in the partially ionised solar atmosphere

The low solar atmosphere is composed of mostly neutral particles, but the importance of the magnetic field for understanding observed dynamics means that interactions between charged and neutral particles play a very important role in controlling the macroscopic fluid motions. As the exchange of momentum between fluids, essential for the neutral fluid to effectively feel the Lorentz force, is through collisional interactions, the relative timescale of these interactions to the dynamic timescale determines whether a single-fluid model or, when the dynamic frequency is higher, the more detailed two-fluid model is the more appropriate. However, as many MHD phenomena fundamentally contain multi-time-scale processes, even large-scale, long-timescale motions can have an important physical contribution from two-fluid processes. In this review we will focus on two-fluid models, looking in detail at two areas where the multi-time-scale nature of the solar atmosphere means that two-fluid physics can easily develop: shock-waves and instabilities. We then connect these ideas to observations attempting to diagnose two-fluid behaviour in the solar atmosphere, suggesting some ways forward to bring observations and simulations closer together.     

光谱01卫星脉冲等离子推力器电源处理单元的开发

针对光谱01卫星应用需求，提出了脉冲等离子推力器电源处理单元的设计方案，给出了验证结果。采用反激变换拓扑和恒功率方式实现了以2.5Hz的频率将5.76μF的储能电容器充电至1600V，将0.68μF的火花塞点火电容充电至800V；采用超快恢复高压整流管、高压绕组串联、高压整流管串联和开关频率设计解决了反激变换器整流二极管反向恢复引起的功率反向传输问题；采用输出钳位二极管和限流电阻解决了储能电容振荡负电压反向一次母线充电的问题。PPT的地面寿命试验和在轨测试结果表明，所设计的电源处理单元方案合理可行。     

不同射流角下等离子体激励对平板气膜冷却影响的数值研究

采用大涡模拟（LES）方法对有/无等离子体激励条件下不同射流角时的平板气膜冷却流场进行了对比研究。结果表明:随着射流角的增大，冷却射流对主流的穿透率与气膜孔下游回流区的范围增大，发卡涡的强度及其抬升射流的能力增强并远离壁面，导致气膜冷却效率降低，但射流角为90°时部分低能冷却流体会进入回流区引起气膜冷却效率升高，故气膜冷却效率在射流角为35°时最大，在射流角为60°时最小；等离子体激励削弱了冷却射流对主流的穿透率，其下拉诱导作用也使得发卡涡头部受到的库塔 儒科夫斯基升力以及水平涡腿间的相互诱导力减小，抑制了发卡涡的发展并促使其破碎为近壁条带结构，从而提高了气膜冷却效率，且射流角越小，上述作用效果越明显，当射流角为35°时中心线气膜冷却效率提高了55%。      

热障涂层在航空发动机涡轮叶片上的应用研究

从热障涂层在涡轮叶片的应用需求出发,研究了陶瓷热障涂层的材料与制备方法,介绍了热障涂层的基本原理和主要工艺特点,解决了热障涂层在喷涂过程中所产生的堵塞气膜孔、减小排气面积、降低疲劳性能、遮挡等方面的难点问题,给出了热障涂层叶片在试验和试车中的考核结果。